Structures in stratified plane mixing layers and the effects of cross-shear

A two-dimensional temporal mixing layer is generated in a stratified tilting tank similar to that used by Thorpe (1968). Extensive flow dynamics visualization is carried out using, for the top and bottom layers, fluids of different densities but of the same index of refraction. The two-dimensional density field is measured with the laser-induced fluorescence technique (LIF). The study examines further the classical problem of the two-dimensional mixing layer and explores the effects of cross-shear on a nominally two-dimensional mixing layer, a situation widespread in complex industrial and natural flows. Cross-shear is another component of shear, in plane with but perpendicular to the main shear of the base flow, generated by tilting the tank around a second axis

The effect of flow oscillations on cavity drag

An experimental investigation of flow over an axisymmetric cavity shows that self-sustained, periodic oscillations of the cavity shear layer are associated with low cavity drag. In this low-drag mode the flow regulates itself to fix the mean-shear-layer stagnation point at the downstream corner. Above a critical value of the cavity width-to-depth ratio there is an abrupt and large increase of drag due to the onset of the ‘wake mode’ of instability. It is also shown by measurement of the momentum balance how the drag of the cavity is related to the state of the shear layer, as defined by the mean momentum transport $\rho\overline{u}\overline{v}$ and the Reynolds stress $\rho\overline{u^{\prime}v^{\prime}}$, and how these are related to the amplifying oscillations in the shear layer. The cavity shear layer is found to be different, in several respects, from a free shear layer

Transition from order to chaos in the wake of an airfoil

An experimental effort is presented here that examines the nonlinear interaction of multiple frequencies in the forced wake of an airfoil. Wakes with one or two distinct frequencies behave in an ordered manner – being either locked or quasi-periodic. When a third incommensurate frequency is added to the system, the flow demonstrates chaotic behaviour. Previously, the existence of the three-frequency route to chaos has been reported only for closed system flows. It is important to note that this chaotic state is obtained at a low Reynolds number. However, the chaotic flow shows localized characteristics similar to those of high Reynolds number turbulent flows. The degree of chaotic behaviour is verified by applying ideas from nonlinear dynamics (such as Lyapunov exponents and Poincaré sections) to the experimental data, thus relating the basic physics of the system to the concepts of mode interaction and chaos. Significant changes to the vortex configuration in the wake and to the r.m.s. velocity profile occur during the transition from order to chaos

On the resonance of a pliant tube as a mechanism for valveless pumping

Valveless pumping can be achieved through the periodic compression of a pliant tube asymmetrically from its interfaces to different tubing or reservoirs. A mismatch of characteristic impedance between the flow channels is necessary for creating wave reflection sites. Previous experimental studies of the behaviour of such a pump were continued in order to demonstrate the wave mechanics necessary for the build-up of pressure and net flow. Specific measurements of the transient and resonant properties were used to relate the bulk responses to the pump mechanics. Ultrasound imaging through the tube wall allowed visualization of the wall motion concurrently with pressure and flow measurements. For analysis, a one-dimensional wave model was constructed which predicted many of the characteristics exhibited by the experiments

Aortic Wave Dynamics and Its Influence on Left Ventricular Workload

The pumping mechanism of the heart is pulsatile, so the heart generates pulsatile flow that enters into the compliant aorta in the form of pressure and flow waves. We hypothesized that there exists a specific heart rate at which the external left ventricular (LV) power is minimized. To test this hypothesis, we used a computational model to explore the effects of heart rate (HR) and aortic rigidity on left ventricular (LV) power requirement. While both mean and pulsatile parts of the pressure play an important role in LV power requirement elevation, at higher rigidities the effect of pulsatility becomes more dominant. For any given aortic rigidity, there exists an optimum HR that minimizes the LV power requirement at a given cardiac output. The optimum HR shifts to higher values as the aorta becomes more rigid. To conclude, there is an optimum condition for aortic waves that minimizes the LV pulsatile load and consequently the total LV workload

Experiments on the forced wake of an airfoil

The effect of initial flow conditions on the wake of an airfoil is examined in an experiment which uses the ‘strip heater’ technique to externally force the airfoil wake. The strip heaters are used to introduce waves into the top and bottom boundary layers of a thin symmetric airfoil which are subsequently amplified and introduced to the wake. The evolution and interaction of the waves in the wake is the primary interest of this study. A linear stability analysis is applied to the mean velocity profiles in order to understand the frequency selection process in the wake. It is seen that the mean velocity profile adjusts itself in order to become more receptive to the forced frequency of oscillation, resulting in the suppression of previously existing frequencies. The amplitude of oscillations in the wake can be controlled by varying the phase relation between two input signals. In this respect, cancellation and enhancement of the oscillations is possible. The linear stability analysis is applied to the cancellation/enhancement flow to verify the level of cancellation achieved. The receptivity of the system to external forcing is established. A substantial reduction in drag is achieved for forcing frequencies near the centre of the receptivity range

Performance prediction of point-based three-dimensional volumetric measurement systems

Point-based three-dimensional volumetric measurement systems are defined as multi-view vision systems which reconstruct a three-dimensional scene by first identifying key points on the views and then performing the reconstruction. Examples of these are defocusing digital particle image velocimetry (DDPIV) (Pereira et al 2000 Exp. Fluids 29 S78–84) and 3D particle tracking velocimetry (3DPTV) (Papantoniou and Maas 1990 5th Int. Symp. on the Application of Laser Techniques in Fluid Mechanics) which reconstruct clouds of flow tracers in order to estimate flow velocities. The reconstruction algorithms in these systems are variations of an epipolar line search. This paper presents a generalized error analysis of such methods, both in reconstruction precision (error in the reconstructed scene) and reconstruction quality (number of ambiguities or 'ghosts' produced)

Resonant pumping in a multilayer impedance pump

This paper introduces the concept of multilayer impedance pump, a novel pumping mechanism inspired by the embryonic heart structure. The pump is a composite two-layer fluid-filled elastic tube featuring a thick gelatinous internal. Pumping is based on the impedance pumping mechanism. In an impedance pump, elastic waves are generated upon external periodic compressions of the elastic tube. These waves propagate along the tube's walls, reflect at the tube's extremities, and drive the flow in a preferential direction. The originality in the multilayer impedance pump design relies on the use of the thick internal gelatinous layer to amplify the elastic waves responsible for the pumping. As a consequence, only small excitations are needed to produce significant flow. This fully coupled fluid-structure interaction problem is solved for the flow and the structure using the finite element method over a relevant range of frequencies of excitation. Results show that the multilayer impedance pump is a complex system that exhibits a resonant response. Flow output and inner wall motion are maximal when the pump is actuated at the resonant frequency. The wave interaction mechanism present in an impedance pump is described here in details for the case of a multilayer impedance pump. Using energy balance for the passive portion of the elastic tube, we show that the elastic tube itself works as a pump and that at resonance maximum energy transmission between the elastic tube and the fluid occurs. Finally, the pump is especially suitable for many biomedical applications

Penile length and anogenital distance in male newborns from different Iranian ethnicities in Golestan Province

Background: Anogenital distance (AGD) is a feasible and accepted parameter of exogenous or endogenous androgens effects on development of reproductive system